Views: 745 Author: ntsmart Publish Time: 2026-11-18 Origin: ntsmart
A central kitchen cooks for many outlets at once, so its layout follows batch volume and delivery windows, not table count. Plan production capacity first, then work backwards to zones, cold chain, and utilities. NTS supplies complete kitchen packages for catering operators; here is the sequence that works.
Size Production Around Peak Batch Volume
Start with the busiest day, not the average. A kitchen serving 800 to 1,200 covers a day needs capacity for a two to three hour batch window, plus 20 to 25 percent headroom. Capacity is set by the slowest station, so match kettles, combi ovens, and blast chillers to the same hourly output.
Separate Raw, Cooked, and Dispatch Zones
Goods move in one direction: receiving, raw prep, cooking, portioning, dispatch. Never let a raw trolley cross a cooked-food aisle. Keep raw and ready-to-eat areas on separate drainage and hand-wash points, with cold holding below 5°C and hot holding above 63°C. Crossovers are the most common inspection failure.
Build the Cold Chain Into the Floor Plan
Chill cooked food from 63°C to 5°C within 90 minutes, then hold at 0 to 4°C. Reserve a temperature-controlled dispatch bay by the loading door, with room for insulated crates and a two-hour loading window. Walk-in freezers at -18°C should sit away from the cooking line.
Plan Utilities Before Equipment Arrives
Confirm three-phase 380V/50Hz supply, gas pressure, floor drains with a 1 to 2 percent fall, and a grease trap before ordering. Calculate extraction and make-up air for the whole line, not per appliance. Leave 60 centimeters behind equipment for cleaning.
NTS is a one-stop commercial kitchen solutions provider and B2B exporter serving catering groups, hotels, and distributors across Southeast Asia, Africa, and South America. We configure complete equipment packages and layout drawings rather than parts or repair services. Plan your central kitchen at www.ntsmart.com.
How much space does a central kitchen need?
No fixed ratio. Size it from peak covers and the batch window, then add 20 to 25 percent headroom plus cold, dry, and dispatch storage.
What temperatures must a central kitchen hold?
Cold storage at 0 to 4°C, freezers at -18°C, cold holding below 5°C, and hot holding above 63°C.
Why does one-way flow matter?
It prevents raw ingredients crossing cooked food, which is the most common hygiene failure found during catering kitchen inspections.
Can a central kitchen be expanded later?
Yes, if utility rough-ins, drainage, and extraction are sized for future lines at the start, which is far cheaper than retrofitting them.
content is empty!